Latest Articles in Fabrication
-
Renovate by Berkowitz, JE Berkowitz
September 2, 2010Renovate by Berkowitz is a commercial window retrofitting system that combines existing nonoperable single-pane units and insulating glass manufactured by JE Berkowitz, Pedricktown, N.J., to create an energy efficient triple-pane system. The single and double-paned units are joined together using a custom version of Super Spacer TriSeal from Edgetech I.G., Cambridge, Ohio. Installation takes... -
Insulating glass unit analysis bolsters independent, third party certificationMarch 26, 2009
-
Daylighting with hermetically sealed computer- controlled louvers between litesAugust 1, 2007It’s the middle of June in the Phoenix suburb of Scottsdale, Ariz., and the intense desert sun spurs the mercury’s climb to the 108-degree mark and beyond. Roger Watson, vice president of sales and marketing for Saint-Gobain Glass Exprover NA, peers out one of two windows in the fluorescent-lit building he’s occupied since moving to Scottsdale three months ago....
-
August 1, 2006Last November’s move by the Louisiana legislature to establish and enforce a statewide uniform building code creates new marketing opportunities for fenestration companies.The 11 parishes hit hardest by hurricanes Katrina and Rita already are required to meet the wind and flood provisions of the 2003 International Building Code and International Residential Code, and the rest of the state...
-
Simple device helps to determine the correct sideJuly 1, 2006Window installation has become more difficult because glaziers must ensure proper orientation of low-emissivity coatings.While fabricators have various means of determining low-e orientation during the manufacturing of insulating glass units, glaziers’ few conventional methods for on-site verification have proven ineffective, until the advent of portable detectors. With these devices,...
-
The play of glass in the preservation of art, historySeptember 1, 2005Museums house antiques, treasures and heritage. They conserve history and tell the story of who we are. People visit museums to view exhibits, preferably well lit. Curators and visitors, however, express dramatically opposing views of what kind of light best illuminates exhibits in a museum. The trend runs toward natural light from large expanses of glass. Nearly every current museum renovation,...
-
A little-known measure, damage-weighted transmittance, emerges as a way to assess fading risksSeptember 1, 2005In choosing the most appropriate glass for commercial and residential projects, more architects look at the issue of fading, specifically with regard to fabrics, finishes, carpeting and artwork that will occupy the interior of their finished buildings.In assessing the potential fading risks associated with the glass they specify, most architects look at a single measure on the performance data...
-
When antiquities, priceless collections, venerable art, fussy curators and deep pockets come into play.September 1, 2005Museums and art galleries present challenges to glazing designs, given the tight environmental conditions that must be met. Consideration must be given to many parameters, often conflicting, including the quality and quantity of light, ultraviolet resistance, aesthetics, thermal performance, condensation resistance, strength, security performance, safety and cost. For a best-practice curatorial...
-
Complex subject made easySeptember 1, 2005Would you want to consider a “climate” inside your insulating glass unit? Probably not. During manufacture, a volume of air is trapped in IG at a certain temperature and relative humidity, then exposed to the forces of nature, heat, cold and pressures. Without a desiccant to dry the air space, the trapped moisture condenses and creates “rain” inside the IG when the...
-
Day of the sun: Energy savings result from testing a mock-up of The New York Times’ new headquarters
November 1, 2004Owners of The New York Times Co., along with researchers at the Environmental Energy Technologies Division of Lawrence Berkeley National Laboratories in Berkeley, Calif., constructed a 4,500-square-foot mock-up of the paper’s new headquarters in the parking lot of its College Point, Queens, printing facility. The researchers used the model of the southwest corner of the headquarters for...
What's Hot
-
Great Glazing: Custom interior officeThis commercial office space in Tulsa, Okla., features a 42-foot-long, custom, continuous art mural that spans 14 glass panels suspended from the ceiling. Created by Tulsa artist May Yang, the mural is based on local Oklahoma themes, transitioning from rural landscape to the Tulsa skyline. Great Glazing: Joliet Junior College Campus...
-
Building on the success of the Top Glass Fabricators rankings introduced last year, Glass Magazine is expanding its coverage to include the Top Metal Companies, featuring the leading manufacturers and fabricators of metal products in the United States and Canada. The Top Metal Companies include those that manufacture, fabricate and sell curtain wall, storefront and entrance, commercial interior...
-
In an effort to spotlight the people who make the Glass Magazine Award-winning products and projects possible, this year’s program included people-centric categories, for which the industry submitted their picks for best installer, production supervisor, project manager and sales rep.After narrowing down the nominations to three finalists in each category, the Glass Magazine editors asked the...
©2013 National Glass Association. All Rights Reserved. Powered by Digital Loom.