Latest Articles in Auto Glass

  • Windshield removal and replacement instructions
    The top exposed edge of the windshield is close to the pinchweld wall, which is susceptible to damage during windshield removal. Before cutout, apply several layers of tape to the pinchweld wall to protect the painted surface. The top edge is so close to the pinchweld that damage might be unavoidable; however, if you have a second technician on hand, use the following procedure: Cut the...
  • Windshield removal and replacement instructions
    The three push-in retainers on the leading edge of the cowl panel on this vehicle bite very aggressively and may break if care is not taken. From the underside of the retainer, push up on the black center portion while simultaneously prying up with a tack puller on the top of the retainer. Make sure to apply even pressure to release the retainer.
  • Windshield and back glass removal and replacement instructions
    When removing the rearview mirror on this vehicle, note that disconnection of the wiring harness might require re-calibration of the mirror accessories' electronic memory.
  • Windshield and back glass removal and replacement instructions
    The back glass edge on this vehicle is entirely exposed. The top and sides appear to be far enough away from the wall of the pinchweld to allow for cutout using a cold knife, but the bottom is very tight.
  • Windshield and back glass removal and replacement instructions
    All sides of the back glass are exposed, with an underside PAAS-like molding on the bottom only that will come attached to the new glass. If you scratch the vehicle body during cutout, outside of the bonding area, take care not to prime where it will be visible. It might be necessary to use touch-up paint instead of pinchweld primer.
  • This free, PDF download includes glass removal and replacement instructions for the 1964-1966 Chevrolet pick-up truck.
  • Windshield removal and replacement instructions
    The top and side moldings on this vehicle are exposed PAAS and far enough away from the pinchweld wall to cut out without damage.
  • Windshield, rear door glass and back glass removal and replacement instructions
    Transit1_thumb.jpg
    The windshield is rather large for a small vehicle and may require two technicians or a single-set tool. The hood requires the ignition key to open. There are two back glasses on the Transit and two options. The options both include a wiper; the second option has a wiper without a defroster.  
  • Windshield and back glass removal and replacement instructions
    camarothumb.jpg
    The windshield on this vehicle is fairly easy to cut out. The exposed edges are far enough away from the body that any tool can be used, but tape up the exposed painted panels to protect against possible damage. When installing the back glass, make sure there is no urethane residue on the pinchweld walls, or the moldings will not fit correctly.
  • Windshield and back glass removal and replacement instructions
    HondaThumb.jpg
    There are two back glasses on this vehicle: an upper lite and a lower lite that are separated by a midlevel spoiler. The lower glass part has a Honda logo and is a dealer purchase.
Page 3 of 43
 << First | < Previous | 1 | 2 | 4 | 5 Next > | Last >> 

What's Hot

  • This commercial office space in Tulsa, Okla., features a 42-foot-long, custom, continuous art mural that spans 14 glass panels. 
    Great Glazing: Custom interior officeThis commercial office space in Tulsa, Okla., features a 42-foot-long, custom, continuous art mural that spans 14 glass panels suspended from the ceiling. Created by Tulsa artist May Yang, the mural is based on local Oklahoma themes, transitioning from rural landscape to the Tulsa skyline.   Great Glazing: Joliet Junior College Campus...
  • A look at the leading manufacturers and fabricators of metal products, broken down by sales volume, number of locations and product offering. 
    Building on the success of the Top Glass Fabricators rankings introduced last year, Glass Magazine is expanding its coverage to include the Top Metal Companies, featuring the leading manufacturers and fabricators of metal products in the United States and Canada. The Top Metal Companies include those that manufacture, fabricate and sell curtain wall, storefront and entrance, commercial interior...
  • Read about the winners
    In an effort to spotlight the people who make the Glass Magazine Award-winning products and projects possible, this year’s program included people-centric categories, for which the industry submitted their picks for best installer, production supervisor, project manager and sales rep.After narrowing down the nominations to three finalists in each category, the Glass Magazine editors asked the...