Frenum is a hydraulic hinge for interior applications and showers. It is a door closer, completely manufactured in Italy, suitable for doors up to 220 pounds. Frenum can be installed on frameless glass, aluminum frame or wood doors. Suitable for glass thicknesses of 3/8 inch and ½ inch, and for a max door width of 39.4 inches, it has a factory present strength of EN 1154 – 2 and takes less than 10 minutes to install. 

Frenum is a hydraulic hinge for interior applications and showers. It is a door closer, completely manufactured in Italy, suitable for doors up to 220 pounds. Frenum can be installed on frameless glass, aluminum frame or wood doors. Suitable for glass thicknesses of 3/8 inch and ½ inch, and for a max door width of 39.4 inches, it has a factory present strength of EN 1154 – 2 and takes less than 10 minutes to install. 

Frenum is a hydraulic hinge for interior applications and showers. It is a door closer, completely manufactured in Italy, suitable for doors up to 220 pounds. Frenum can be installed on frameless glass, aluminum frame or wood doors. Suitable for glass thicknesses of 3/8 inch and ½ inch, and for a max door width of 39.4 inches, it has a factory present strength of EN 1154 – 2 and takes less than 10 minutes to install. 

The Concealed Hydraulic Door Closer by Tag Hardware is a bottom patch fitting for doors. Unlike the conventional floor spring, the hydraulic door closer requires no cavity on the ground for installation, making the process quick and creating an aesthetically appealing seamless doorway. The absence of an opening on the floor allows for a cleaner surface with minimal accumulation of dust or water, making this product ideal for places requiring extra hygiene such as hospitality and health care. Booth #2307. 905/760-2000, taghardware.ca
 

The Concealed Hydraulic Door Closer by Tag Hardware is a bottom patch fitting for doors. Unlike the conventional floor spring, the hydraulic door closer requires no cavity on the ground for installation, making the process quick and creating an aesthetically appealing seamless doorway. The absence of an opening on the floor allows for a cleaner surface with minimal accumulation of dust or water, making this product ideal for places requiring extra hygiene such as hospitality and health care. Booth #2307. 905/760-2000, taghardware.ca
 

The Concealed Hydraulic Door Closer by Tag Hardware is a bottom patch fitting for doors. Unlike the conventional floor spring, the hydraulic door closer requires no cavity on the ground for installation, making the process quick and creating an aesthetically appealing seamless doorway. The absence of an opening on the floor allows for a cleaner surface with minimal accumulation of dust or water, making this product ideal for places requiring extra hygiene such as hospitality and health care. Booth #2307. 905/760-2000, taghardware.ca
 

The AEL-42 louver is a 1.122-inch deep thinline stationary louver that is primarily used for PTAC, glazing mechanical screen and other aesthetic applications where water penetration is not a concern. Architectural PTAC louvers enhance the outside appearance of any facility that uses Packaged Terminal Air Conditioners and Heat Pumps. With a Reliable louver, users are assured that a PTAC unit’s performance will not be hindered due to incorrect intake/exhaust placement or incorrect A/C unit attachment.
 

The AEL-42 louver is a 1.122-inch deep thinline stationary louver that is primarily used for PTAC, glazing mechanical screen and other aesthetic applications where water penetration is not a concern. Architectural PTAC louvers enhance the outside appearance of any facility that uses Packaged Terminal Air Conditioners and Heat Pumps. With a Reliable louver, users are assured that a PTAC unit’s performance will not be hindered due to incorrect intake/exhaust placement or incorrect A/C unit attachment.
 

Mapes Panels developed a large-missile and bullet impact-resistant line of laminated panels, MapeShield, for use in curtain wall, storefront and window applications where design elements require high-impact and/or high load materials. MapeShield panels can be used in any framing system design for this type of application. The panels can match any architectural finish including Kynar, Anodized and Baked Enamel. Custom applications, including bullet-resistant panels, are also available. 

Mapes Panels developed a large-missile and bullet impact-resistant line of laminated panels, MapeShield, for use in curtain wall, storefront and window applications where design elements require high-impact and/or high load materials. MapeShield panels can be used in any framing system design for this type of application. The panels can match any architectural finish including Kynar, Anodized and Baked Enamel. Custom applications, including bullet-resistant panels, are also available.